AEG LAVATHERM 59840 Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering AEG LAVATHERM 59840. AEG LAVATHERM 59840 48 halaman. Condenser dryer with heat pump

Halaman Cetak

Starting the programme

Press the START PAUSE button. The pro-

gramme is started.

The programme progress is shown in LCD by

appropriate set of icons. From left to the right,

from IRON DRY

depends on the drying cycle chosen. E. g. in

case of STORAGE programme the following

status icons are visible:

Current cycle progress is marked by flashing dash under status icon. When appro-

priate part of drying cycle is accomplished dash becomes steady and appears

flashing under next status icon.

Changing programme

To change a programme which has been selected by mistake once the programme

has started, first turn the programme selector to OFF and then reset the pro-

gramme.

The programme can no longer be changed directly once the programme has started.

If nevertheless there is an attempt to change the programme on the programme

knob, the programme progress display and the maintenance indicators flash. If an

option button (excluding the BUZZER button) is pressed, Err appears in the mul-

tidisplay. The drying programme is not however affected by this (laundry protec-

tion).

Putting in extra items or taking items out before end of programme

1. Open loading door.

WARNING!

Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START PAUSE button to continue the drying cycle.

to ANTI-CREASE

icon

Daily use