AEG LAVATHERM T57800 Informasi Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM T57800. AEG LAVATHERM T57800 30 halaman. Condensation dryer

125987210.qxp

2006-12-04

Changing programme

To change a programme which has been selected by mistake once the pro-

gramme has started, first turn the programme selector to OFF and then reset

the programme.

The programme can no longer be changed directly once the programme has

started. If nevertheless there is an attempt to change the programme on the

programme knob, the programme progress display and the maintenance indi-

cators flash. If an option button (excluding the

is pressed, the corresponding indicator flashes several times. The drying pro-

gramme is not however affected by this (laundry protection).

1. Open loading door

Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the

Once the drying cycle is complete, the

displays light up. If the

an audible signal sounds intermittently.

The drying cycle is automatically followed by a crease guard phase

which lasts around 30 minutes. The drum rotates in intervals during this

phase. The laundry thereby remains relaxed and free of creases. The

laundry can be removed at any time during the crease guard phase. (The

laundry should be taken out towards the end of the crease guard phase

at the latest to prevent creases from forming.)

1. Open loading door

2. Before removing the laundry, remove lint from the micro-fine filer. It

is best to use a damp hand for this purpose (refer to "Cleaning and

maintenance" section).

3. Remove laundry.

4. Turn the programme selector to OFF.

Important! After each drying cycle

– clean the micro-fine filter and fine strainer,

– drain the condensate tank

(refer to the "Cleaning and maintenance" section).

5. Close loading door

10:13

Page 14

START/PAUSE button to continue the drying cycle.

AUDIBLE SIGNAL button has been pressed,

AUDIBLE SIGNAL button)

END and

CREASE GUARD