AEG LAVATHERM T57800 Informasi Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM T57800. AEG LAVATHERM T57800 30 halaman. Condensation dryer

125987210.qxp

2006-12-04

Cleaning heat exchanger

If the

HEAT EXCHANGER display is illuminated, the heat exchanger needs to be

cleaned.

Caution! Operating when the heat exchanger is clogged with lint can dama-

ge the dryer. This also increases energy consumption.

1. Open loading door

2. Open base door. To do this, press the

release button on the bottom of the

loading opening and open the door to the

left.

3. Remove lint from the inside of the door

and the heat exchange chamber. Wipe the

door seal with a damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat exchan-

ger out of the base and carry it horizon-

tally to prevent any remaining water from

spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects to

clean.

develop leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse

thoroughly with a shower head.

8. Replace heat exchanger and lock into

place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the

Caution! Never operate the dryer without the heat exchanger.

10:13

Page 18

The

heat

exchanger

could

HEAT EXCHANGER indicator is still lit.