AEG LAVATHERM T57800 사용자 정보 - 페이지 18

{카테고리_이름} AEG LAVATHERM T57800에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM T57800 30 페이지. Condensation dryer

125987210.qxp

2006-12-04

Cleaning heat exchanger

If the

HEAT EXCHANGER display is illuminated, the heat exchanger needs to be

cleaned.

Caution! Operating when the heat exchanger is clogged with lint can dama-

ge the dryer. This also increases energy consumption.

1. Open loading door

2. Open base door. To do this, press the

release button on the bottom of the

loading opening and open the door to the

left.

3. Remove lint from the inside of the door

and the heat exchange chamber. Wipe the

door seal with a damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat exchan-

ger out of the base and carry it horizon-

tally to prevent any remaining water from

spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects to

clean.

develop leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse

thoroughly with a shower head.

8. Replace heat exchanger and lock into

place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the

Caution! Never operate the dryer without the heat exchanger.

10:13

Page 18

The

heat

exchanger

could

HEAT EXCHANGER indicator is still lit.