Aqua HC 100 Panduan Petunjuk Pengoperasian dan Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian dan Pemeliharaan untuk Pompa Air Aqua HC 100. Aqua HC 100 19 halaman.
Juga untuk Aqua HC 100: Panduan Petunjuk Pengoperasian dan Pemeliharaan (20 halaman)
ENGLISH
1.0 GENERAL COMMENTS
1.1 Warnings
The aim of HC100 pump manual is to provide you with all the necessary information for a proper
installation and maintenance in order to give you optimum results whilst in operation.
For this reason it is really important reading with attention the instructions given below since they
furnish all the indications necessary for the sureness of the installation, use and maintenance
This manual has to be preserved with care to be consulted in whatever
occasion.
At the moment of the receipt you have to check the integrity of the panel
and of all its components, in case of anomalies consult skilled staff
before making interventions.
Before the installation of the pump check that all the data on the pump's
label correspond to those of the electrical plant.
Do not operate with bare/naked hands or feet
Do not leave the equipment exposed to the action of the atmospheric
agents.
Avoid splashing water
The equipment has to be operated from skilled person.
In case of improper functioning of the panel switch off and contact our
technical assistance for any necessary repairs.
For a correct functioning it is necessary to use original spare parts and
original accessories. The producer declines whatever responsibility in
reference with break down due to tampering or the use of not original
spare parts and accessories.
The electrical plant has to be in conformity with the rules of the country
where it is realised.
The room temperature of utilisation can't over take 45° C
1.1 Transport and handling
The equipment must be transported in its original packaging, organized and built in such a way as
to minimize shocks and to protect the protruding parts that can be damaged.
If there is a need for transport after the equipment has already been installed (e.g. for a return for
repair or replacement), reuse the original packaging or, failing that, use a sufficiently sturdy
packaging with the equipment protected with absorbent material (eg bubble wrap).
The external packaging must be such as to guarantee the safety of the equipment in the event of
a fall from 1 meter in height.
1.2 Design standard
Our pumps are manufactured according to General Standards
in force and in compliance with the following European Directives:
n° 2014/30/CE " E.M.C.
n° 2014/35/CE "DBT Low Voltage Directive"
n° 2011/65/UE , 2012/19/UE "direttive RoHs e WEEE"
Granted this we think that in order to obtain an high trustworthiness and a lasting
functioning of the pump it is necessary to follow with attention our manual particularly in
reference with the maintenance!
Cod. ADSP7000177C Rev.0.0 (12/2020)
3