- ページ 4

水ポンプ Aqua HC 100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua HC 100 19 ページ。
Aqua HC 100 にも：取扱説明書 (20 ページ)

ENGLISH

1.0 GENERAL COMMENTS

The aim of HC100 pump manual is to provide you with all the necessary information for a proper

installation and maintenance in order to give you optimum results whilst in operation.

For this reason it is really important reading with attention the instructions given below since they

furnish all the indications necessary for the sureness of the installation, use and maintenance

 This manual has to be preserved with care to be consulted in whatever

occasion.

 At the moment of the receipt you have to check the integrity of the panel

and of all its components, in case of anomalies consult skilled staff

before making interventions.

 Before the installation of the pump check that all the data on the pump's

label correspond to those of the electrical plant.

 Do not operate with bare/naked hands or feet

 Do not leave the equipment exposed to the action of the atmospheric

agents.

 Avoid splashing water

 The equipment has to be operated from skilled person.

 In case of improper functioning of the panel switch off and contact our

technical assistance for any necessary repairs.

 For a correct functioning it is necessary to use original spare parts and

original accessories. The producer declines whatever responsibility in

reference with break down due to tampering or the use of not original

spare parts and accessories.

 The electrical plant has to be in conformity with the rules of the country

where it is realised.

 The room temperature of utilisation can't over take 45° C

The equipment must be transported in its original packaging, organized and built in such a way as

to minimize shocks and to protect the protruding parts that can be damaged.

If there is a need for transport after the equipment has already been installed (e.g. for a return for

repair or replacement), reuse the original packaging or, failing that, use a sufficiently sturdy

packaging with the equipment protected with absorbent material (eg bubble wrap).

The external packaging must be such as to guarantee the safety of the equipment in the event of

a fall from 1 meter in height.

Our pumps are manufactured according to General Standards

in force and in compliance with the following European Directives:

n° 2014/30/CE " E.M.C.

n° 2014/35/CE "DBT Low Voltage Directive"

n° 2011/65/UE , 2012/19/UE "direttive RoHs e WEEE"

Granted this we think that in order to obtain an high trustworthiness and a lasting

functioning of the pump it is necessary to follow with attention our manual particularly in

reference with the maintenance!

Cod. ADSP7000177C Rev.0.0 (12/2020)