Aqua Cooler AC-PN8EBFY Panduan Penggunaan dan Perawatan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Sistem Air Aqua Cooler AC-PN8EBFY. Aqua Cooler AC-PN8EBFY 12 halaman. Surface mounted bottle filler
Halaman CetakINSTALLATION CONT.
Affix the frame to the wall with at least 4 anchors into any appropriate anchor points through the
staggered slotted holes. Be careful to ensure the frame stays centered on the cooler frame.
With 4x T15 Torx screws, assemble the drip tray assembly to the center bracket and wall frame.
Your Partner in Cool.
8
INSTALLATION CONT.
Attach the filter support bracket with 2x T15 Torx screws to the frame and drip tray support
bracket. This bracket helps to prevent the filter cartridge from falling into the cooler unit below
during installation or replacement.
Attach one of the drain elbows to the drip tray stem. Insert the drainpipe provided into the
elbow and then attach another elbow onto the pipe. Use the remaining drainpipe and connect
the drip tray drainage system to the installed P trap.
NOTE: Drainpipes will need to be positioned and cut to length as needed.
9