Avlite AV-HLI2 Panduan Instalasi & Servis - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi & Servis untuk Peralatan Pencahayaan Avlite AV-HLI2. Avlite AV-HLI2 12 halaman. Inset heliport light
Juga untuk Avlite AV-HLI2: Panduan Instalasi & Servis (16 halaman)
Halaman Cetak
Designed to be maintenance free the inset helipad light requires minimal attention, though the
following maintenance and servicing information is provided to help ensure the life of your Avlite
product.
•
Occasional cleaning of the lens may be required using a cloth and warm soapy water.
Compliant to:
• ICAO Annex 14, Volume 2, Heliports, Fourth Edition, July 2013
• FAA Engineering Brief 87
Maintenance & Servicing
Trouble Shooting
Problem
Light will not activate.
Intensity does not match
Compliance
Latest products and information available at www.avlite.com
ICAO & FAA Inset Helipad Light
Remedy
• Remove light from mount
• Ensure 24VDC supply source is active
• Check that 24VDC is present at joint connector
feed the light fixture
• Check polarity of supply line wires is correct
• Measure voltage of Dim line and check against
the table dimming table
• If measured voltage on Dim line is less than
0.5V, remove dim line connection and check light
functionality
• Otherwise replace the light fixture
• Remove light from mount
• Measure voltage of Dim line and check against
the table dimming table
• If measured voltage does not match the expected
value disconnect the light from the Dim line and
re-measure
• If measured voltage on the Dim line still does not
match expected value, inspect the dim line wiring
• Otherwise replace the light fixture
11