Avlite AV-HLI2 설치 및 서비스 매뉴얼 - 페이지 11
{카테고리_이름} Avlite AV-HLI2에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avlite AV-HLI2 12 페이지. Inset heliport light
Avlite AV-HLI2에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (16 페이지)
페이지 인쇄
Designed to be maintenance free the inset helipad light requires minimal attention, though the
following maintenance and servicing information is provided to help ensure the life of your Avlite
product.
•
Occasional cleaning of the lens may be required using a cloth and warm soapy water.
Compliant to:
• ICAO Annex 14, Volume 2, Heliports, Fourth Edition, July 2013
• FAA Engineering Brief 87
Maintenance & Servicing
Trouble Shooting
Problem
Light will not activate.
Intensity does not match
Compliance
Latest products and information available at www.avlite.com
ICAO & FAA Inset Helipad Light
Remedy
• Remove light from mount
• Ensure 24VDC supply source is active
• Check that 24VDC is present at joint connector
feed the light fixture
• Check polarity of supply line wires is correct
• Measure voltage of Dim line and check against
the table dimming table
• If measured voltage on Dim line is less than
0.5V, remove dim line connection and check light
functionality
• Otherwise replace the light fixture
• Remove light from mount
• Measure voltage of Dim line and check against
the table dimming table
• If measured voltage does not match the expected
value disconnect the light from the Dim line and
re-measure
• If measured voltage on the Dim line still does not
match expected value, inspect the dim line wiring
• Otherwise replace the light fixture
11