Avlite AV-OL-CMI Panduan Instalasi & Servis - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Instalasi & Servis untuk Peralatan Pencahayaan Avlite AV-OL-CMI. Avlite AV-OL-CMI 20 halaman. Combined medium intensity obstruction light
Halaman Cetak
10.0 Troubleshooting
Problem
Light will not activate
Light will not operate
for the entire night.
Lights are constantly
on during the day.
11.0 Warranty
Refer to Avlite website at
12.0 Notes
Possible Cause
No power to light
Ambient lighting
conditions
Insufficient Charging •
Incorrect Operation
Mode
www.Avlite.com.
Solution
•
Check battery terminals are properly connected.
•
Check battery voltage is above the flat battery
threshold.
•
Ensure internal toggle switch is set to the 'ON'
position.
•
Ensure light is in darkness.
•
Wait at least 60 seconds for the program to
initialise in darkness.
Expose light to direct sunlight and monitor
operation for several days. Avlite products
typically require 2.5-3.0 minimum hours of direct
sunlight per day to retain full autonomy. From
a discharged state, the light may require several
days of operational conditions to 'cycle' up to
full autonomy.
•
Ensure solar module is clean and not covered by
shading during the day.
•
Check the Operational Mode setting in AvlitePro
is not set to 'Always ON'
Want the latest product information?
Visit
www.avlite.com
19