Avlite AV-OL-CMI 설치 및 서비스 매뉴얼 - 페이지 19

{카테고리_이름} Avlite AV-OL-CMI에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avlite AV-OL-CMI 20 페이지. Combined medium intensity obstruction light

페이지 인쇄

10.0 Troubleshooting

Problem

Light will not activate

Light will not operate

for the entire night.

Lights are constantly

on during the day.

11.0 Warranty

Refer to Avlite website at

12.0 Notes

Possible Cause

No power to light

Ambient lighting

conditions

Insufficient Charging •

Incorrect Operation

Mode

www.Avlite.com.

Solution

•

Check battery terminals are properly connected.

•

Check battery voltage is above the flat battery

threshold.

•

Ensure internal toggle switch is set to the 'ON'

position.

•

Ensure light is in darkness.

•

Wait at least 60 seconds for the program to

initialise in darkness.

Expose light to direct sunlight and monitor

operation for several days. Avlite products

typically require 2.5-3.0 minimum hours of direct

sunlight per day to retain full autonomy. From

a discharged state, the light may require several

days of operational conditions to 'cycle' up to

full autonomy.

•

Ensure solar module is clean and not covered by

shading during the day.

•

Check the Operational Mode setting in AvlitePro

is not set to 'Always ON'

Want the latest product information?

Visit