Aqua Creek Products LIBERTY LIFT Petunjuk Pemasangan, Perakitan, dan Pengoperasian Untuk Pemasang - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan, Perakitan, dan Pengoperasian Untuk Pemasang untuk Peralatan Pencahayaan Aqua Creek Products LIBERTY LIFT. Aqua Creek Products LIBERTY LIFT 15 halaman.

Halaman Cetak

ASSEMBLY INSTRUCTIONS

LIBERTY Lift

1. MOST IMPORTANT:

Carefully inspect the lift upon arrival, noting any damage or

missing parts on the delivery receipt before the delivery truck driver leaves.

If there is damage or missing parts, get a contact name and phone number from the truck driver

and inform him that you will need to file a claim. Contact the trucking company immediately.

Then contact Aqua Creek Products at 888-687-3552. We will assist you in filing a claim and

replacing missing or damaged parts.

If you discover concealed damage after the delivery driver has left, call the trucking company

immediately. You have only three days to report concealed damage to the trucking company.

2. Your Liberty Lift will arrive mostly pre-assembled in a crate. Remove the lift from the crate

and place the lift on the pool deck near where you want to install it.

3. S T O P ! C a r e f u l l y r e a d t h e O w n e r ' s Ma n u a l t h o r o u g h l y b e f o r e p r o c e e d i n g w i t h t h e i n s t a l l a t i o n .

4. Remove the charger and the battery from the equipment box, and place the charger where it can

be conveniently plugged into a 115v outlet.

5. Place the battery on the charger and charge it fully before attempting to operate the lift.

Note the charging time will vary considerably depending upon temperate, age of the battery,

and the residual charge in the battery.

NOTE: For maximum battery life and charge capacity it is recommended that you charge the

24v battery pack as often as is reasonably possible. For example, when the facility is closed for

the night, we recommend that you remove the battery from the lift and place it on the charger.

The wall mountable charger will automatically shut off when the battery is fully charged.

6. Plug the remote control handset into the

jack socket located on the bottom left of the

control box. It is very important to make

sure that the cord is fully recessed into the

control box socket (See Trouble Shooting

Guide).

7. Make sure the two power cords from the

two actuators are plugged into the two

connector jacks marked 1 and 2 located on

the bottom of the control box, just to the

right of the larger remote control plug-in.

Again, take extra care to make sure that the

cords are plugged in all the way and fully

seated (See Trouble Shooting Guide).