DF ROBOT LeoYan Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Stasiun Cuaca DF ROBOT LeoYan. DF ROBOT LeoYan 20 halaman.

2 软件安装 Installation of Software

安装 Arduino

IDE：http://arduino.cc/en/Main/Software

Install Arduino IDE ：

Arduino1.0.5.)

安装相关库：从 DFRobot 官网产品页下载压缩文件中获取 libraries;

Install related libraries: find libraries from the compressed files downloaded on our website

解压后，将其拷贝到 Arduino/libraries/目录下

Unzip the files and then copy and paste it to the file of Sketchbook location within the

Arduino file just as it is shown below.

\Arduino 的程序库位置(Sketchbook location)\

3 程序加载 Program Loading

1.1 设置时钟模块时间

Set time for the clock module

1）硬件连接：如何将实时时钟模块和主控板连接，注意 VCC 要连接到 ICSP 区域，R 区的

VCC（+）是需要通过程序打开才能使用。

Hardware connection: how to connect the clock module with the main control panel.

Notice that VCC shall be connected to the ICSP area & VCC（+）located within the R area

cannot be used without the program.

http://arduino.cc/en/Main/Software

--libraries\

--public

-- ds3231

-- bmp085

-- dht

-- WeatherStation

CNP a g e

（版本不低于 Arduino1.0.5）

( The version shall at least be

| 6