DF ROBOT LeoYan Manual - Página 6
Procurar online ou descarregar pdf Manual para Estação meteorológica DF ROBOT LeoYan. DF ROBOT LeoYan 20 páginas.
2 软件安装 Installation of Software
1)
安装 Arduino
IDE:http://arduino.cc/en/Main/Software
Install Arduino IDE :
Arduino1.0.5.)
2)
安装相关库:从 DFRobot 官网产品页下载压缩文件中获取 libraries;
Install related libraries: find libraries from the compressed files downloaded on our website
3)
解压后,将其拷贝到 Arduino/libraries/目录下
Unzip the files and then copy and paste it to the file of Sketchbook location within the
Arduino file just as it is shown below.
\Arduino 的程序库位置(Sketchbook location)\
3 程序加载 Program Loading
1.1 设置时钟模块时间
Set time for the clock module
1) 硬件连接:如何将实时时钟模块和主控板连接,注意 VCC 要连接到 ICSP 区域,R 区的
VCC(+)是需要通过程序打开才能使用。
Hardware connection: how to connect the clock module with the main control panel.
Notice that VCC shall be connected to the ICSP area & VCC(+)located within the R area
cannot be used without the program.
DFRobot 版权所有
Copyright © DFRobot. All rights reserved.CC BY-NC 3.0
http://arduino.cc/en/Main/Software
--libraries\
--public
-- ds3231
-- bmp085
-- dht
-- WeatherStation
CNP a g e
(版本不低于 Arduino1.0.5)
( The version shall at least be
| 6