Aqua Lung CALYPSO FIRST STAGE Panduan Pemeliharaan Teknis - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemeliharaan Teknis untuk Sistem irigasi Aqua Lung CALYPSO FIRST STAGE. Aqua Lung CALYPSO FIRST STAGE 16 halaman.

Halaman Cetak

Calypso First Stage Service Manual

Install a new, unlubricated o-ring (15) into the groove inside

the inlet fitting (17).

10.

Install a new, lubricated o-ring (16) onto the outside of the

inlet fitting (17). Using your finger, press fit a new conical

filter (14), narrow end first, into the inlet fitting.

NOTE:

Be carefull not to get any lubricant on or near the

conical filter.

11.

Load the body (8) into a

vise using the vise-mount-

ing tool. Using a large

crescent wrench, snug the

cap (2) onto the body mak-

ing sure that metal meets

metal.

12.

Invert the body (8) in vise. Install the cosmetic black washer

(13), smooth side up, onto the body. Set the yoke (18) on

top of the washer.

13.

Thread in the inlet fitting

(17). Using a ft/lbs torque

wrench, the 111001 modi-

fied 26mm socket and a 3"

extension, apply a torque of

18 ft/lbs to the inlet fitting.

Install dust cap (19) and

yoke screw (22).

14.

Install o-rings (9,21) on to each port plug (10,20). Using a

4mm allen key, install each of the port plugs into its respec-

tive port.

15.

Install the interstage hose into its respective port. Using

an in/lbs torque wrench and a 9/16" crows foot, torque the

hose to 40 in/lbs.

16.

Slide hose protector back

into position.