Bil-Jax 4527A Informasi Operasional dan Keselamatan - Halaman 6
Jelajahi secara online atau unduh pdf Informasi Operasional dan Keselamatan untuk Lift Boom Bil-Jax 4527A. Bil-Jax 4527A 13 halaman. Articulate boom lift
Halaman Cetak
G. CONTROLS and THEIR FUNCTIONS;
GROUND CONTROL STATION; continued ...
18 - 19. BOOM ROTATION BUTTONS;
and holding a desired
BOOM ROTATIONCLOCKWISE
COUNTERCLOCKWISE
time enables the boom to rotate in the direction
selected. The boom will rotate through 700
degrees until the buttons are released or
the stop is reached.
20 - 24. OUTRIGGER CONTROLS;
For automatic outrigger extension / retraction;
Select
or
EXTEND
RETRACT
and the
AUTO LEVEL
To manually extend or retract the outriggers:
Select
or
EXTEND
RETRACT
and one of the
OUTRIGGER
same time. The outrigger indicator
up when the outriggers are properly deployed
and the boom weight is on the outriggers. Each of the outer outrigger
outrigger footpad. Each of the inner outrigger
G. CONTROLS and THEIR FUNCTIONS;
PLATFORM CONTROL STATION;
(see the Manufacturer's "Operator's Manual", pages; 16-17).
The "Platform Control Station" is used
to control boom motion. To access the
Platform Control Station, turn the key
switch at the ground control station to
the platform control setting and enter
the work cage.
1 - 2. ENGINE START and CHOKE;
applicable on this model.
Pressing the button
3. HORN BUTTON;
will sound the horn. Use
to warn personnel in the area of a
falling object hazard, impending boom
motion or the need for assistance.
4. BATTERY CONDITION INDICATOR;
Indicator
s light up to indicate the
LED
level of charge remaining in the
batteries... green - good charge level,
yellow - need for charge and red -
charge level is low; boom operations
should be halted until batteries are
recharged.
5. EMERGENCY STOP BUTTON;
pushed in, the emergency
disconnects electrical power to the
"Ground" and "Platform" control stations.
The emergency
STOP
only be pressed to immediately stop all
boom motions. To resume control, pull
out the emergency
The
6. SPEED BUTTONS;
along the lower right side of the control
panel must be pressed and held while
selecting boom functions. Four speeds are available to control positioning of the boom lift.
7 - 8. BOOM EXTEND/RETRACT BUTTONS;
button at the same time extends the telescopic boom. Pressing and holding a desired
button at the same time retract the boom. Boom motion continues until the buttons are
BOOM RETRACT
released or until the boom reaches a hard stop or a safe travel limit.
9 - 14. BOOM RAISE/DOWN BUTTONS;
button at the same time will raise the chosen boom. Pressing a desired
BOOM RAISE
UPPER/LOWER / JIB BOOM DOWN
until the buttons are released or until the boom reaches a hard stop or a safe travel limit.
15. SPEED BUTTONS;
held while selecting a boom function. Four speeds are available to control positioning of the boom lift.
2015 - BIL-JAX #4725A, "TOWABLE - ARTICULATE BOOM LIFT" - OPERATIONAL & SAFETY INFO
Pressing
button and the
SPEED
or
button at the same
(Figure; 3-3)
outrigger button
button at the same time.
outrigger button
buttons at the
s light
LED
LED
Not
button
HORN
When
button
STOP
pushbutton should
button.
STOP
buttons
SPEED
Pressing and holding a desired
Pressing and holding a desired
button at the same time will lower the chosen boom. Boom motion continues
The
buttons along the lower right side of the control panel must be pressed and
SPEED
s indicates load is on the
LED
light up and a buzzer sounds when the boom is level.
(Figure; 3-2) Platform Control Station
SPEED
button and the
SPEED
button and the
BOOM EXTEND
button and the
SPEED
UPPER/LOWER / JIB
button and the
SPEED
...
page 6 - 12