Avonic AV-CON300 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Avonic AV-CON300. Avonic AV-CON300 16 halaman. Ptz camera controller
Juga untuk Avonic AV-CON300: Panduan Pengguna (13 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

Appendix

Technical Data

Comm. Interface

Protocol

Baud Rate

Number of cameras

Joystick

Display

Adjustment functions

Power

Power Consumption

Working Temperature

Storage Temperature

Relative Humidity

Dimensions

Net Weight

Quick Installation Guide

Step 1. Connect power, RS232 cable from CH1 of the controller to RS232IN of PTZ camera, check that

all DIP switches are OFF, DIP 7 is ON, then power ON the controller and PTZ camera.

Step 2. In the Controller Menu (press Menu, password 8888) select Channel 1. Make sure the camera

communication protocol is set to VISCA on address 1 and baud rate 9600. See camera manual for

reference.

Step 3. Now it is possible to control the camera by the Avonic AV-CON300 camera controller.

www.avonic.eu

RS-485/RS-232

Pelco-D, Pelco-P, VISCA

2400bps, 4800bps, 9600bps, 19200bps, 38400bps

Up to 50

3D-axis (Left/Right, Up/Down, Zoom In/Out)

2 line LCD display with backlight

Pan/Tilt, Zoom, Focus, Brightness, Iris, Gain, White Balance (Auto,

m R/B Gain)

DC12V

<2W

0℃~40℃

-20℃~+50℃

≤90% (non-condensation)

290mm x 180mm x 115mm

1.6 kg