Avonic AV-CON300 Kullanıcı Kılavuzu - Sayfa 16
Kontrolör Avonic AV-CON300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avonic AV-CON300 16 sayfaları. Ptz camera controller
Ayrıca Avonic AV-CON300 için: Kullanıcı Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Appendix
Technical Data
Comm. Interface
Protocol
Baud Rate
Number of cameras
Joystick
Display
Adjustment functions
Power
Power Consumption
Working Temperature
Storage Temperature
Relative Humidity
Dimensions
Net Weight
Quick Installation Guide
Step 1. Connect power, RS232 cable from CH1 of the controller to RS232IN of PTZ camera, check that
all DIP switches are OFF, DIP 7 is ON, then power ON the controller and PTZ camera.
Step 2. In the Controller Menu (press Menu, password 8888) select Channel 1. Make sure the camera
communication protocol is set to VISCA on address 1 and baud rate 9600. See camera manual for
reference.
Step 3. Now it is possible to control the camera by the Avonic AV-CON300 camera controller.
www.avonic.eu
RS-485/RS-232
Pelco-D, Pelco-P, VISCA
2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Up to 50
3D-axis (Left/Right, Up/Down, Zoom In/Out)
2 line LCD display with backlight
Pan/Tilt, Zoom, Focus, Brightness, Iris, Gain, White Balance (Auto,
m R/B Gain)
DC12V
<2W
0℃~40℃
-20℃~+50℃
≤90% (non-condensation)
290mm x 180mm x 115mm
1.6 kg
16