Aqua One Maxi 103 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Aqua One Maxi 103. Aqua One Maxi 103 12 halaman. Maxi series powerhead

Halaman Cetak

Installation 105/106

All Aqua One Maxi Power Heads come fully

assembled and are ready to use.

1. The 105 and 106 power heads come

supplied with 1 x 21mm inlet adapter and 1 x

19mm outlet adapter.

a) If no attachment is required simply place

the power head in the aquarium and fasten to

the glass using the suction cups.

b) If the power head is to be used in a sump

attach the 19mm outlet and use 19mm hose

to run from the outlet of the pump to the

aquarium. For extra security a good quality

stainless steel clamp should be used to secure

the hose to the outlet.

c) If the power head is to be used to run an

under gravel filter remove the pre filter and

attach the 21mm inlet adapter to the base of

the power head, then sit the power head in

the aquarium with the inlet attached to the

up lift of the under gravel filter and attach the

power head to the wall of the aquarium with

the suction cups.

Fig 1

Maintenance 105/106

Clean the impeller at least once a month.

Refer to the "Know You Filter" page for help

with the following procedure.

1. Remove the power head from the aquarium

Fig 2

and take it to the sink.

2. Grasp the motor with one hand and the pre

filter with the other and gently pull apart.

3. Turn the lock anti clock wise to remove then

pull the impeller cover off to gain access to the

impeller.

4. Pull impeller from the motor and rinse

properly. Use an Aqua One double ended pipe

brush to clean the impeller and the impeller

well and also any of the outlet options that are

being used.

5. Put the power head back together and

return to the aquarium. Ensure your hand is

not wet, plug in at the power supply and turn

Fig 3

on.

Fig 4