Billi Quadra Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Pipa Billi Quadra. Billi Quadra 13 halaman. Xl, xt, xr tap options
Juga untuk Billi Quadra: Panduan Instalasi (8 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi (7 halaman)
Halaman Cetak
- 1. Warnings & Important Information
- 1. Warnings & Important Information
- 2. General Maintenance
- 2. General Maintenance
- 3. Features and Modes
- 3. Features and Modes
- 4. Options and Operation
- 4. Options and Operation
- 5. Safety Switch Settings
- 5. Safety Switch Settings
- 6. Dispenser Icon Codes
- 6. Dispenser Icon Codes
- 7. Dispenser Icon
- 7. Dispenser Icon
- 8. Filter Change Due Monitor
- 8. Filter Change Due Monitor
User guide
Billi Quadra & Quadra Sparkling Plus – XL.
Removing the CO
1 . Isolate the water supply and turn off
the power .
– This will prevent the internal pump
from pressurizing the system .
2 . Turn off the CO
regulator by turning the
2
black knob anti-clockwise .
3 . Drain any remaining pressure by activating
the sparkling water option on the dispenser
installed .
Ensure the pressure gauge shows near to
zero pressure – if the pressure is less than
one bar, and the dial is fully anti-clockwise,
then the cylinder can be removed with only
a small amount of CO
4 . Hold the regulator and rotate the Cylinder
clockwise to remove .
– If the bottle is not empty, CO
while you are turning the bottle . The bottle
will self-seal prior to the thread being free
from the regulator .
– Avoid breathing air containing CO
contact with the cold escaping gas as
per the Safety Data Sheet .
cylinder
2
escaping
2
may escape
2
or
2
9