AVOURY ONE Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur AVOURY ONE. AVOURY ONE 20 halaman.
Juga untuk AVOURY ONE: Panduan Pengguna (20 halaman), Panduan Cepat (10 halaman), Panduan Cepat (3 halaman)
U S E
Use
Avoury tea capsules contain ideal portions of tea
for use in the tea machine.
The size of the capsule is determined by the fact
that the tea needs space to develop during the
brewing process. A lid foil ensures that the tea
in the capsule is protected against loss of its
aroma. This lid foil must be removed before
the capsule can be used. There is a porous net
under the lid foil, which has either fine mesh or
coarse mesh depending on the fineness of the
loose tea. Each capsule has a code that tells the
tea machine which parameters the tea requires
to provide maximum enjoyment.
Download the free Avoury App directly
to update the machine software (see
chapter „Control via Avoury App").
Switching on the tea
machine
1.
Connect the mains plug with a properly
installed socket.
2. Ensure that the capsule compartment
is closed.
3. To switch on the tea machine, press the
Start-Button
. The Start-Button
flashes whilst it is starting up. Once the tea
machine is ready, the Start-Button
show a continuous light.
Rinsing the brewing
chamber
The tea machine must be cleaned out before the
first use and after longer periods of non-use to
remove any manufacturing residues and con-
tamination. To do this, the tea machine must be
switched on.
1.
Remove the packaging material and the ad-
hesive strips as well as the sticker with the
serial number on the drip tray
2. Remove the water tank
with fresh tap water.
3. Replace the water tank
4. Fill the water tank with water up to a maxi-
mum level of two finger widths below the
upper edge.
5. Place a collecting vessel that holds at least
300 ml volume under the outlet
6. Push the Start-Button
machine is ready-to-use.
7. Press the –
at the same time.
The tea machine rinses the brewing cham-
2
ber and dispenses water into the collecting
vessel. The machine is fully rinsed when the
Start-Button
8. Empty the contents of the tray of the drip
will
drawer
sink.
6
and rinse it out
4
again.
4
and wait until the
/+
filling capacity buttons
shows a continuous light.
and the collecting vessel into the
7
EN
.
.
8
PAGE 31