- ページ 10

キッチン家電 AVOURY ONEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AVOURY ONE 20 ページ。
AVOURY ONE にも：ユーザーマニュアル (20 ページ), クイックマニュアル (10 ページ), クイックマニュアル (3 ページ)

ページを印刷する

U S E

Use

Avoury tea capsules contain ideal portions of tea

for use in the tea machine.

The size of the capsule is determined by the fact

that the tea needs space to develop during the

brewing process. A lid foil ensures that the tea

in the capsule is protected against loss of its

aroma. This lid foil must be removed before

the capsule can be used. There is a porous net

under the lid foil, which has either fine mesh or

coarse mesh depending on the fineness of the

loose tea. Each capsule has a code that tells the

tea machine which parameters the tea requires

to provide maximum enjoyment.

Download the free Avoury App directly

to update the machine software (see

chapter „Control via Avoury App").

Switching on the tea

machine

Connect the mains plug with a properly

installed socket.

2. Ensure that the capsule compartment

is closed.

3. To switch on the tea machine, press the

Start-Button

. The Start-Button

flashes whilst it is starting up. Once the tea

machine is ready, the Start-Button

show a continuous light.

Rinsing the brewing

chamber

The tea machine must be cleaned out before the

first use and after longer periods of non-use to

remove any manufacturing residues and con-

tamination. To do this, the tea machine must be

switched on.

Remove the packaging material and the ad-

hesive strips as well as the sticker with the

serial number on the drip tray

2. Remove the water tank

with fresh tap water.

3. Replace the water tank

4. Fill the water tank with water up to a maxi-

mum level of two finger widths below the

upper edge.

5. Place a collecting vessel that holds at least

300 ml volume under the outlet

6. Push the Start-Button

machine is ready-to-use.

7. Press the –

at the same time.

The tea machine rinses the brewing cham-

ber and dispenses water into the collecting

vessel. The machine is fully rinsed when the

Start-Button

8. Empty the contents of the tray of the drip

will

drawer

sink.

and rinse it out

again.

and wait until the

filling capacity buttons

shows a continuous light.

and the collecting vessel into the

PAGE 31