AVPro Edge AC-MX44/88-AUHD-HDBT Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengalih Matriks AVPro Edge AC-MX44/88-AUHD-HDBT. AVPro Edge AC-MX44/88-AUHD-HDBT 4 halaman. 4x4 and 8x8 18gb p s 4k60 (4:4:4) hdmi matrix switchers

Halaman Cetak

Display IP Data

In order to see the current IP settings, press and hold INPUT 3 and INPUt 4 buttons

simultaneously (for 3 seconds). This screen will change every 3 seconds showing

additional settings (host, net mask, router IP).

NOTE: the screen always starts with the current IP address of the matrix:

In order to toggle DHCP on and off, press and hold the INPUT 1 and INPUT 4 buttons

simultaneously (for 3 seconds).

In order to prevent potential IP problems, most IP settings have to be managed in the Free

PC Software or by using RS-232 commands.

NOTE: The default IP address is

Quick Network Connect to Web Interface

and immediately connect to the matrix switch:

1. Connect the LAN port into an active router port.

2. On most networks you can simply type the Default IP address into any web browser.The

Default IPAddress is 192.168.1.239.

If you are on a closed network or non-standard, the following may work better

when using DHCP:

1. Use an Ethernet cable to connect the LAN port on the switch to an unused, active port

on the router.

2. Enable DHCP by pressing the INPUT 1 and INPUT 4 buttons simultaneously for 3 seconds.

3. Wait 5 seconds, then press and hold the INPUT 3 and INPUT 4 buttons simultaneously (for

3 seconds). The display will show the assigned IP address.

4. Input the IP Address into any web browser.

Setting a Static IP:

•Once connected, you can use the web interface to set a static IP address.

•A static IP can also be set by using the RS-232 software or a direct command

iR Remote Control

•

When routing HDMI, the matrix can be controlled by using the IR remote supplied

with the product.

•

The labels on the left are the OUTPUT numbers. The left arrow button decrements to

the next input port, and the right arrow increments to the next input port.

•

The numbers are for selecting a desired INPUT

192.168.001.239

Use the following steps to quickly