AVPro Edge AC-MX44/88-AUHD-HDBT Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Матричний комутатор AVPro Edge AC-MX44/88-AUHD-HDBT. AVPro Edge AC-MX44/88-AUHD-HDBT 4 сторінки. 4x4 and 8x8 18gb p s 4k60 (4:4:4) hdmi matrix switchers
Друкувати сторінкуDisplay IP Data
:
In order to see the current IP settings, press and hold INPUT 3 and INPUt 4 buttons
simultaneously (for 3 seconds). This screen will change every 3 seconds showing
additional settings (host, net mask, router IP).
NOTE: the screen always starts with the current IP address of the matrix:
In order to toggle DHCP on and off, press and hold the INPUT 1 and INPUT 4 buttons
simultaneously (for 3 seconds).
In order to prevent potential IP problems, most IP settings have to be managed in the Free
PC Software or by using RS-232 commands.
NOTE: The default IP address is
Quick Network Connect to Web Interface
and immediately connect to the matrix switch:
1. Connect the LAN port into an active router port.
2. On most networks you can simply type the Default IP address into any web browser.The
Default IPAddress is 192.168.1.239.
If you are on a closed network or non-standard, the following may work better
when using DHCP:
1. Use an Ethernet cable to connect the LAN port on the switch to an unused, active port
on the router.
2. Enable DHCP by pressing the INPUT 1 and INPUT 4 buttons simultaneously for 3 seconds.
3. Wait 5 seconds, then press and hold the INPUT 3 and INPUT 4 buttons simultaneously (for
3 seconds). The display will show the assigned IP address.
4. Input the IP Address into any web browser.
Setting a Static IP:
•Once connected, you can use the web interface to set a static IP address.
•A static IP can also be set by using the RS-232 software or a direct command
iR Remote Control
•
When routing HDMI, the matrix can be controlled by using the IR remote supplied
with the product.
•
The labels on the left are the OUTPUT numbers. The left arrow button decrements to
the next input port, and the right arrow increments to the next input port.
•
The numbers are for selecting a desired INPUT
192.168.001.239
:
:
Use the following steps to quickly