AVPro Edge AC-EX70-UHD-KIT Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang AVPro Edge AC-EX70-UHD-KIT. AVPro Edge AC-EX70-UHD-KIT 19 halaman. Ultra slim 4k hdmi via hdbaset 70 meter extender
Juga untuk AVPro Edge AC-EX70-UHD-KIT: Panduan Memulai Cepat (4 halaman)
Halaman Cetak
EDID Management - Transmitter
Default out of the box all the dip switches are down (off) "BYPASS (HDBT)"mode. This will pass the
EDID of the connected display to the source un-altered.
NOTE: This is a 10.2Gbps extender, when in "BYPASS (HDBT)"make sure the source is
not sending a signal that exceeds this HDBaseT Extender set� See bandwidth chart locat-
ed on page[s] 14 for more information�
EDID Copy Instructions
Set the 4 DIP switches to 1 1 1 1 (all Up/On) with the connected sink (display) powered on. This will
copy and store the downstream EDID from the sink (display) onto the Transmitter. This will stay until
the above procedure is repeated. All 4 DIP switches do not need to be moved at the same time, mov-
ing them individualy or in any combination will copy the EDID from the connected sink device.
12