AVPro Edge AC-EX70-UHD-KIT 사용자 설명서 - 페이지 12

{카테고리_이름} AVPro Edge AC-EX70-UHD-KIT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge AC-EX70-UHD-KIT 19 페이지. Ultra slim 4k hdmi via hdbaset 70 meter extender
AVPro Edge AC-EX70-UHD-KIT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

EDID Management - Transmitter

Default out of the box all the dip switches are down (off) "BYPASS (HDBT)"mode. This will pass the

EDID of the connected display to the source un-altered.

NOTE: This is a 10.2Gbps extender, when in "BYPASS (HDBT)"make sure the source is

not sending a signal that exceeds this HDBaseT Extender set� See bandwidth chart locat-

ed on page[s] 14 for more information�

EDID Copy Instructions

Set the 4 DIP switches to 1 1 1 1 (all Up/On) with the connected sink (display) powered on. This will

copy and store the downstream EDID from the sink (display) onto the Transmitter. This will stay until

the above procedure is repeated. All 4 DIP switches do not need to be moved at the same time, mov-

ing them individualy or in any combination will copy the EDID from the connected sink device.