DG FPGA Pengaturan - Halaman 17

Jelajahi secara online atau unduh pdf Pengaturan untuk Perangkat Keras Komputer DG FPGA. DG FPGA 20 halaman.
Juga untuk DG FPGA: Pengaturan (5 halaman), Pengaturan (14 halaman), Pengaturan (8 halaman), Pengaturan (10 halaman), Pengaturan (18 halaman)

Halaman Cetak
DG FPGA Pengaturan
dg_toeudp25gip_fpgasetup_xilinx.doc
The step to setup test environment by using two FPGAs is described in more details as
follows.
Follow step 1) – 7) of topic 2 (Test environment setup when using FPGA and PC) to prepare
FPGA board and SFP28/QSFP28 connection for running the demo. After two FPGA boards
have been configured completely, Serial console/JTAG Terminal displays the menu to select
Client mode, Server mode, or Fixed MAC mode. The step after FPGA configuration is
described as follows.
1) Open Serial console/JTAG Terminal for board#1 and board#2 and then set the input to the
console for selecting the initialization mode. The example to initialize by Server-Client
mode is described as following steps.
i) Set '1' on the console of FPGA board#1 for running Server mode.
ii) Set '0' on the console of FPGA board#2 for running Client mode.
iii) Default parameters for Server or Client are displayed on the console, as shown in
Figure 3-2.
7-Jun-21
Figure 3-2 Input mode
Page 17