DG FPGA Mise en place - Page 17

Parcourez en ligne ou téléchargez le pdf Mise en place pour {nom_de_la_catégorie} DG FPGA. DG FPGA 20 pages.
Également pour DG FPGA : Mise en place (5 pages), Mise en place (14 pages), Mise en place (8 pages), Mise en place (10 pages), Mise en place (18 pages)

Imprimer la page
DG FPGA Mise en place
dg_toeudp25gip_fpgasetup_xilinx.doc
The step to setup test environment by using two FPGAs is described in more details as
follows.
Follow step 1) – 7) of topic 2 (Test environment setup when using FPGA and PC) to prepare
FPGA board and SFP28/QSFP28 connection for running the demo. After two FPGA boards
have been configured completely, Serial console/JTAG Terminal displays the menu to select
Client mode, Server mode, or Fixed MAC mode. The step after FPGA configuration is
described as follows.
1) Open Serial console/JTAG Terminal for board#1 and board#2 and then set the input to the
console for selecting the initialization mode. The example to initialize by Server-Client
mode is described as following steps.
i) Set '1' on the console of FPGA board#1 for running Server mode.
ii) Set '0' on the console of FPGA board#2 for running Client mode.
iii) Default parameters for Server or Client are displayed on the console, as shown in
Figure 3-2.
7-Jun-21
Figure 3-2 Input mode
Page 17