DG KCU105 Panduan Memulai Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Komputer DG KCU105. DG KCU105 15 halaman. Fpga setup for 2-ch raid0 by nvme-ip demo
Halaman Cetakdg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
3) Connect USB cable between FPGA board and PC for FPGA programming and Serial
console as shown in Figure 2-4
a) VCK190: Connect one USB type-C cable.
b) Other boards: Connect two micro USB cables.
4) Turn on power switch of AB17/AB18, ATX power supply for AB18 (when using AB18), and
FPGA development board as shown in Figure 2-5.
3-Aug-22
Figure 2-4 USB cable connection
Figure 2-5 Turn on power
Page 9