DG KCU105 Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Computer Hardware DG KCU105. DG KCU105 15 pages. Fpga setup for 2-ch raid0 by nvme-ip demo

Print Page

dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc

3) Connect USB cable between FPGA board and PC for FPGA programming and Serial

console as shown in Figure 2-4

a) VCK190: Connect one USB type-C cable.

b) Other boards: Connect two micro USB cables.

4) Turn on power switch of AB17/AB18, ATX power supply for AB18 (when using AB18), and

FPGA development board as shown in Figure 2-5.

3-Aug-22

Figure 2-4 USB cable connection

Figure 2-5 Turn on power

Page 9