DG KCU105 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Computer Hardware DG KCU105. DG KCU105 15 pages. Fpga setup for 2-ch raid0 by nvme-ip demo

Print Page

dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc

b) For Quad M.2 card, please follow below steps.

i. Insert two M.2 NVMe SSDs to M2_1 and M2_2 connectors on Hyper Quad M.2

card, as shown in Figure 2-2.

Figure 2-2 Two M.2 NVMe SSDs on Hyper Quad M.2 Card

ii. Confirm that two mini jumpers are inserted at J5 connector on AB18. After that,

connect FPGA Side (A-side) on AB18 to PCIe connector on FPGA board and

connect Hyper Quad M.2 NVMe SSD Card to device side (B-Side) on AB18, as

shown in Figure 2-3.

Warning: Please confirm that the Hyper Quad M.2 Card is inserted in the

correct side of AB18 (B-side, not A-side) before power on system.

iii. Connect ATX power supply to AB18-PCIeX16 board.

Figure 2-3 AB18, Quad M.2 Card, and FPGA board connection

3-Aug-22

Page 8