DG AB12-HSMCRAID Manual

Jelajahi secara online atau unduh pdf Manual untuk Adaptor DG AB12-HSMCRAID. DG AB12-HSMCRAID 6 halaman.

HSMC SATA RAID board [AB12-HSMCRAID]

Introduction

Thank you for choosing HSMC SATA RAID board [Part Number: AB12-HSMCRAID] ("RAID board" in this manual.)

The RAID board is compliant with HSMC standard of Altera and provides 8 SATA channels at maximum by high speed

serial interface in HSMC so that user can build SATA RAID prototype system.

The RAID board can directly connect with 8 pcs of 2.5"-SATA drive. User can supply power to the connected SATA drive

via 4-pin ATX Standard power connector.

On-board 150MHz low-jitter differential oscillator will supply high-quality reference SATA clock to the refclk input of

FPGA via HSMC I/F (CLKIN2p/n).

Board Appearance

The RAID board size is 78mm width and 90mm length.

Following figure-1 and figure-2 shows component side and solder side appearance respectively.

Manual

Figure-1: AB12-HSMCRAID component side

[Ver1.0E]