DG AB12-HSMCRAID Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Adaptor DG AB12-HSMCRAID. DG AB12-HSMCRAID 6 halaman.

Connection to the FPGA board

Connect the RAID board with HSMC connector on the FPGA board.

For 2.5"-SATA drive connection, user can directly connect SATA drive with CN0 – CN7 SATA connector on the RAID

board.

Use 4-pin ATX Standard power connector for SATA drive power supply.

User must check that all SATA drives, RAID board and FPGA board are powered off when remove or connect.

To connect 3.5"-SATA drive, use SATA general extention cable. Following general extention cable is suitable for 3.5"

usage.

Vendor: AREA (Setagaya Denki)

Product Number: AR-S005S

URL ：

http://www.area-powers.jp/denki/cable/s005s.htm

Vendor: AINEX

Product Number: SAT-15EXPA

URL ：

http://www.ainex.jp/products/sat-15expa.htm

When user want to assign SATA channel of the RAID board as a SATA Device to connect with SATA Host-PC, use above

extention cable along with the following crossover adapter provided from DesignGateway.

Vendor: DesignGateway

Product Number: AB02-CROSSOVER

URL ：

http://www.design-gateway.com/ABseries.html

Figure-2: AB12-HSMCRAID solder side