CPS IAQPRO SmartAir Panduan Pemilik - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Ukur CPS IAQPRO SmartAir. CPS IAQPRO SmartAir 18 halaman. Professional indoor air quality meter
Juga untuk CPS IAQPRO SmartAir: Panduan Pemilik (9 halaman), Panduan Memulai Cepat dan Pemecahan Masalah (8 halaman)
Halaman Cetak
TROUBLESHOOTING GUIDE Cont'd
Remote Operation
Can't connect with mobile device
Low Or High Temperature Or
Humidity Readings
Connection Status
How do I know when the SmartAir
is paired to my mobile device?
VOC sensor doesn't seem to
provide accurate readings
16
Mobile device must be ≤ 100 ft (30m) from SmartAir
(direct line of sight)
Charge mobile device battery
If SmartAir has been stored in temperature extremes, it
must be placed indoors, inplugged in NORMAL TEMPERA-
TURE AND HUMIDITY conditions for 6~8 hours before
being powered ON.
A blue dot is visible in the upper right corner of the
Performance Screen or Test Screen
The LED light bar will flash blue about once
every 5 seconds
User must set tVOC Sensor Baseline PRIOR TO INITIAL
USE (See Quick Start Instruction Guide)
If the SmartAir is turned OFF after conducting tests at
various locations on a jobsite, the VOC sensor will need
to warmup each time after being powered OFF. The war-
mup period may last 5 to 60 minutes (depending on the
amount of time the SmartAir was turned off). See Quick
Start Guide or Owner's Manual for detailed instructions.