CPS IAQPRO SmartAir Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы CPS IAQPRO SmartAir. CPS IAQPRO SmartAir 18 страниц. Professional indoor air quality meter
Также для CPS IAQPRO SmartAir: Руководство пользователя (9 страниц), Руководство по быстрому запуску и устранению неполадок (8 страниц)

TROUBLESHOOTING GUIDE Cont'd

Remote Operation

Can't connect with mobile device

Low Or High Temperature Or

Humidity Readings

Connection Status

How do I know when the SmartAir

is paired to my mobile device?

VOC sensor doesn't seem to

provide accurate readings

Mobile device must be ≤ 100 ft (30m) from SmartAir

(direct line of sight)

Charge mobile device battery

If SmartAir has been stored in temperature extremes, it

must be placed indoors, inplugged in NORMAL TEMPERA-

TURE AND HUMIDITY conditions for 6~8 hours before

being powered ON.

A blue dot is visible in the upper right corner of the

Performance Screen or Test Screen

The LED light bar will flash blue about once

every 5 seconds

User must set tVOC Sensor Baseline PRIOR TO INITIAL

USE (See Quick Start Instruction Guide)

If the SmartAir is turned OFF after conducting tests at

various locations on a jobsite, the VOC sensor will need

to warmup each time after being powered OFF. The war-

mup period may last 5 to 60 minutes (depending on the

amount of time the SmartAir was turned off). See Quick

Start Guide or Owner's Manual for detailed instructions.