CPT CPDP-104 Manual Petunjuk Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Alat Listrik CPT CPDP-104. CPT CPDP-104 10 halaman. Circle guide for drill press

Halaman Cetak

UNPACKING

This product requires assembly

Carefully remove the product and any accessories from

the box. Makes sure that all items listed in the packing

list are included. Inspect the product carefully to make

sure no breakage or damage occurred during shipping

Do not discard the packing material until you have

carefully inspected and satisfactorily operated the

product. If any parts are damaged or missing, please

1 Centering Bit (Steel) ( .25 inch x 5) (1)

2 Centering Tool (PVC) (1)

3 Center Pins (PVC/Steel) (3)

4 Alignment Pin (Steel) (1)

5 Rotation Alignment Pin (Steel) (1)

6 Slide Plate (PVC) (1)

7 Left Alignment Plate (PVC) (1)

8 Right Alignment Plate (PVC) (1)

ASSEMBLY

WARNING:

Do not attempt to modify this product or create

accessories not recommended for use with this

product. Any such alteration or modification is

misuse and could result in a hazardous condition

leading to possible serious personal injury.

WARNING:

Do not connect power supply until assembly is

complete. Failure to comply could result in

accidental starting and possible serious personal

injury.

9 Rotation Plate (PVC) (1)

10 Mounting/Lock Down Bolts-1/4 inch (9)

11 Lock Down Knob (1)

12 Fender Washer (12)

13 Hex Nuts (1/4" x 20) (8)

14 Hex Key (5/32 SA) (1))

15 Table Mount (Wood) (1)

16 Degree Gear (PVC) (4)

17 Safety Disk (PVC) (1)