CPT CPDP-104 Manual Petunjuk Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Alat Listrik CPT CPDP-104. CPT CPDP-104 10 halaman. Circle guide for drill press

Halaman Cetak

Step 4 - Inserting Center Pin

Insert Center Pin thru the bottom of

Slide Plate in the pocket closest to the

drill channel. Make sure Center Pin is

flush with the bottom of Slide plate.

Step 5 - Attaching Slide Plate

Slide the Slide Plate between the two

alignment plates that are mounted on

Table Mount. Insert lock down bolt

through designated slot in the Slide

Plate and hole of Table Mount.

Step 6 - Securing Alignment Plates

Tighten the Left Alignment Plate bolts

to Table Mount, then push both the

Slide Plate and Right Alignment Plate

snug up against the Left Alignment

Plate, tighten the Right Alignment

Plate bolts to the Table Mount. Make

sure that Slide Plate can still slide

between the two Alignment Plates.

Tighten all bolts using the allen

wrench supplied.