CPT CPDP-104 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} CPT CPDP-104에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPT CPDP-104 10 페이지. Circle guide for drill press

Step 4 - Inserting Center Pin

Insert Center Pin thru the bottom of

Slide Plate in the pocket closest to the

drill channel. Make sure Center Pin is

flush with the bottom of Slide plate.

Step 5 - Attaching Slide Plate

Slide the Slide Plate between the two

alignment plates that are mounted on

Table Mount. Insert lock down bolt

through designated slot in the Slide

Plate and hole of Table Mount.

Step 6 - Securing Alignment Plates

Tighten the Left Alignment Plate bolts

to Table Mount, then push both the

Slide Plate and Right Alignment Plate

snug up against the Left Alignment

Plate, tighten the Right Alignment

Plate bolts to the Table Mount. Make

sure that Slide Plate can still slide

between the two Alignment Plates.

Tighten all bolts using the allen

wrench supplied.