Dell Inspiron 2100 Panduan Referensi Sistem - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Referensi Sistem untuk Laptop Dell Inspiron 2100. Dell Inspiron 2100 45 halaman. Vga card installation instructions
Juga untuk Dell Inspiron 2100: Mulai di sini (2 halaman), Informasi Pengaturan dan Fitur (8 halaman), Panduan Referensi Cepat (17 halaman), Panduan Servis (38 halaman), Spesifikasi (2 halaman), Petunjuk Instalasi (1 halaman)
Halaman Cetak
To install a card:
1.
Remove the computer
cover.
2.
Rotate the power
supply.
3. Choose a system-board card connector for the card.
4. Unscrew and remove the metal filler bracket that covers the card-slot opening for the card slot you intend to use.
5. Insert the card firmly into the system-board card connector.
Align the cutout on the bottom of the card connector with the crossbar in the system-board card connector. Gently rock the card into the
system-board card connector until it is fully seated.
6. When the card is firmly seated in the system-board card connector, secure the card-mounting bracket with the screw you removed in
To remove a card:
1.
Remove the computer
cover.
2.
Rotate the power
supply.
3. Disconnect any cables connected to the card.
4. Remove the screw from the card-mounting bracket.
5. Grasp the card by its top corners, and ease it out of its system-board card connector.
6. If you are removing the card permanently, install a metal filler bracket over the empty card-slot opening in the computer.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain Federal Communications Commission (FCC)
certification of the system. The brackets also keep dust and dirt out of your computer.
Memory
To install a memory module:
1.
Remove the computer
cover.
1 Card connector
2 Card
3 System-board card connector
4 Card mounting bracket and screw
1 Cutouts (2)
2
Connector
3 Memory module
4 Notches (2)
5 Securing clips (2)
step
4.