Dell Inspiron 2100 Systeem referentiehandleiding - Pagina 21

Blader online of download pdf Systeem referentiehandleiding voor {categorie_naam} Dell Inspiron 2100. Dell Inspiron 2100 45 pagina's. Vga card installation instructions
Ook voor Dell Inspiron 2100: Start Here (2 pagina's), Informatie over instellingen en functies (8 pagina's), Snelle referentiehandleiding (17 pagina's), Servicehandleiding (38 pagina's), Specificaties (2 pagina's), Installatie-instructies (1 pagina's)

To install a card:

Remove the computer

cover.

Rotate the power

supply.

3. Choose a system-board card connector for the card.

4. Unscrew and remove the metal filler bracket that covers the card-slot opening for the card slot you intend to use.

5. Insert the card firmly into the system-board card connector.

Align the cutout on the bottom of the card connector with the crossbar in the system-board card connector. Gently rock the card into the

system-board card connector until it is fully seated.

6. When the card is firmly seated in the system-board card connector, secure the card-mounting bracket with the screw you removed in

To remove a card:

Remove the computer

cover.

Rotate the power

supply.

3. Disconnect any cables connected to the card.

4. Remove the screw from the card-mounting bracket.

5. Grasp the card by its top corners, and ease it out of its system-board card connector.

6. If you are removing the card permanently, install a metal filler bracket over the empty card-slot opening in the computer.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain Federal Communications Commission (FCC)

certification of the system. The brackets also keep dust and dirt out of your computer.

Memory

To install a memory module:

Remove the computer

cover.

1 Card connector

2 Card

3 System-board card connector

4 Card mounting bracket and screw

1 Cutouts (2)

Connector

3 Memory module

4 Notches (2)

5 Securing clips (2)

step