Dell Inspiron 600m Panduan Servis - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Servis untuk Laptop Dell Inspiron 600m. Dell Inspiron 600m 41 halaman. Hard drive
Juga untuk Dell Inspiron 600m: Mulai di sini (2 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Panduan Memulai (2 halaman), Panduan Pengguna (34 halaman), Setup Manual (2 halaman), Memulai (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Panduan Servis (41 halaman), Panduan Pengguna Media Base (26 halaman), Panduan Servis (40 halaman), Panduan Servis (41 halaman), Menginstalasi dan Mengkonfigurasi (38 halaman), Mulai Cepat (2 halaman), Mulai Cepat (2 halaman), Mulai Cepat (2 halaman), Menyiapkan Komputer Anda (2 halaman), Panduan Servis (4 halaman)

Halaman Cetak

Display Bezel

CAUTION:

NOTICE:

as the back panel) on the computer.

1. Follow the instructions in

2. Remove the keyboard.

3. Remove the

4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of the bezel.

5. Remove the six M2 x 5-mm screws located on the front of the bezel.

NOTICE:

6. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of

the bezel away from the top cover.

Display Panel

CAUTION:

NOTICE:

1. Follow the instructions in

2. Remove the keyboard.

3. Remove the

4. Remove the two M2 x 5-mm screws from each side of the display panel.

5. Unsnap the cable from the top cover hook, and lift the bracket out of the display assembly.

6. Lift the display panel, and rotate the display panel out of the top cover.

7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

1 top flex-cable connector

2 top display-cable

connector

3 pull-tab on bottom flex-

cable connector

8. Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.

Great user manuals database on

Before performing the following procedures, read the safety instructions in your Owner's Manual.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

"Preparing to Work Inside the

display

assembly.

Carefully separate the bezel from the top cover to avoid damage to the bezel.

Before performing the following procedures, read the safety instructions in your Owner's Manual.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

"Preparing to Work Inside the

display

bezel.

UserManuals.info

Computer."