Avtech RMA-F024-SEN Catatan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Aksesori Avtech RMA-F024-SEN. Avtech RMA-F024-SEN 5 halaman. Flood sensor-cable
Halaman Cetak
Flood Sensor - Cable (RMA-F008-SEN & RMA-F024-SEN)
Sensor Features & Specifications
Environment Condition Monitored
Type Of Sensor
Flood Detection Switch Port
Normal State
Alarm State
Cable Fault Detection Switch Port
Normal State
Alarm State
Power Supply
Sensor Cable Type
2-wire low-voltage speaker wire
Included
Length
Maximum Extendible Length
RJ-11 leader
Included
Length
Maximum Extendible Length
Flood Cable
Included
Length
Compatible Products
Previous Generation Flood Sensor Cable
In the previous generation of Flood Sensor Cable, the orange-twisted Flood Cable and
the RJ-11 leader are separate components that must be fitted together. To assemble the
previous generation Flood Sensor Cable:
•
Connect the 4-pin custom jack
on the orange twisted Flood
Cable to the matching port on
the RJ-11 leader.
•
Screw the cover down on the plastic threads for a secure fit.
When the orange-twisted Flood Cable is disconnected from the RJ-11 leader cable, the
Cable Fault Detection port's switch state will read as Open.
Presence/absence of liquid
Switch
Closed (Liquid NOT detected)
Open (Liquid detected)
Closed (No cable fault)
Open (Cable fault)
AVTECH 5V power adapter
Yes
25' (7.6 m)
900' (274.3 m)
Yes, built-in
25' (7.6 m)
100' (30.5 m)
Yes
8' (2.4 m), 24' (7.3 m) and custom lengths available
Any Room Alert model
Page 4
AVT-180309-2.0.0