Avtech RMA-F024-SEN Catatan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Aksesori Avtech RMA-F024-SEN. Avtech RMA-F024-SEN 5 halaman. Flood sensor-cable

Configure Your Switch Sensor

Use Room Alert Monitor's Built-In Web Interface

Settings

Navigate to

options you see below will vary depending on your Room Alert model.

1. Scroll down to Switch Sensor Settings.

2. Find the switch sensor label that matches the port you connected your switch sensor

to. For example, if you used the first switch sensor port on your Room Alert Monitor,

look for Sensor 1 Label; if you used the second, look for Sensor 2 Label, and so on.

3. In Sensor X Label, you may leave the default, "Switch Sen X," or enter something more

descriptive of up to 15 characters. You may use the following characters in sensor

labels: letters, numbers, spaces, hyphens (-), underscores (_) and periods (.).

4. In Alarm On, select the alarm state (

may find the alarm state of your switch sensor under the Features & Specifications

section of this Installation Note.

5. In Alarm Profile, which controls light towers and relays on your Room Alert Monitor,

you may leave the default,

menu.

Save Settings

6. Select

automatically reboot and commit your changes.

Sensors

in your Room Alert Monitor's web interface. The



Open

Profile 1

, or choose another profile from the drop-down

at the top or bottom of the page. Your Room Alert Monitor will

Page 5

Closed

) for your switch sensor. You

www.serverroomenvironments.co.uk

AVT-180309-1.2.0