Dell XFR630 Panduan Referensi Cepat - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Laptop Dell XFR630. Dell XFR630 23 halaman. With touch fully rugged notebook

To remove the hard disk drive:

1. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your

docking device for instructions.

2. Ensure that the computer is turned off.

3. See "Bottom View" for the location of the hard disk drive compartment. If the 2 optional screws that secure the

quarter-turn latches are installed, remove the 2 screws on the latches on the hard disk drive compartment using a

#1 Philips screw driver. If the 2 security screws are not installed, proceed to step 4.

4. Lift each latch and turn each a quarter-turn, towards the 'unlock' icon, to release the latching mechanism.

Remove the compartment cover from the computer.

5. Locate the tab on the hard disk drive and pull it back to disconnect the hard disk drive from the motherboard.

6. Continue to utilize the tab to assist in removing the hard disk drive from the compartment.

To replace the hard disk drive, follow the removal procedure in the reverse order.

For additional information regarding the hard disk drive, see the XFR630 with Touch Fully Rugged Notebook User's Guide.

DirectVue

The XFR630 provides an optional touch screen display for entering and selecting data using an approved pointing device

such as your finger, a passive stylus or any non-abrasive smooth blunt object that will not damage the touch display.

NOTICE: For more detailed instructions on the use, care and configuration of your touch display, please refer to

the XFR630 with Touch User's Guide.

CAUTION: The optional DirectVue

as passive stylus input directly onto the screen. With the optional DirectVue

stylus is included with the XFR630 for use in selecting items on the touch screen. Other pointing

devices can be used with the touch screen such as any non-abrasive, smooth or blunt object that will

not damage the touch screen display. The touch screen surface can be damaged by ink pens, marker

pens or other pointed or abrasive objects. The use of non-approved input devices that cause damage

to the digitizer or LCD may not be covered by the limited warranty.

The touch screen is pre-configured and pre-calibrated at the factory, but may require further calibration to improve

accuracy for entering or selecting data on the touch display. Please refer to the 4 Points Calibration information provided

below regarding calibrating your XFR630 Touch Display and using your stylus.

4.1.1

Touchkit is a software utility tool that allows you to configure various touch features. You can launch Touchkit by clicking

Start -> Programs -> Touchkit -> Configure Utility.

NOTE: The touch screen is pre-configured and pre-calibrated at the factory, but may require further calibration to

improve accuracy for entering or selecting data on the touch display, or to further configure it to your specific

application.

Touch Display Information

Touch Display has been designed to accept finger touch as well

Touch Display, a