Dell 3250 Pembaruan Informasi - Halaman 7
Jelajahi secara online atau unduh pdf Pembaruan Informasi untuk Server Dell 3250. Dell 3250 32 halaman. Product guide (.pdf)
Juga untuk Dell 3250: Panduan Produk (37 halaman), Panduan Pemilik (39 halaman), Panduan Pemilik (39 halaman), Panduan Memulai Cepat (2 halaman)
Halaman Cetak
Ta b l e 1 - 3 .
S C S I H a r d - D r i v e S t a t u s I n d i c a t o r C o d e s ( c o n t i n u e d )
Indicator
Blinks green twice per second at equal
intervals
Blinks green twice per second at unequal
intervals
Blinks amber 4 times per second
Blinks green, then amber, and then off,
repeating this sequence every 2 seconds
Steady green
NOTE: The drive busy indicator identifies whether the hard drive is active on the SCSI bus. This
indicator is controlled by the hard drive.
Intel Server Management Software Options
The Lock Front Panel option does not change the status of the SD/INT button. This
button cannot be locked out.
After changing the system's IP address, you must reboot the system. The Intel Server
Management software will not be available until you reboot the system.
Installing the PERC 4/DC Megaraid Driver
If you are using a RAID controller card with the Red Hat Linux operating system, you must
update the megaraid driver. Two methods for updating this driver are described below.
From the operating system, you may install the megaraid driver rpm from the Dell
PowerEdge 3250 PERC 4/DC CD. The megaraid driver rpm is also available on
support.dell.com. Perform the following steps to install the rpm:
Type cd /mnt/cdrom/RedHat/RPMS.
1
Install the megaraid driver rpm by typing the following command:
2
rpm -ivh --force megaraid-1.18f-1.ia64.rpm
Reboot your system to use this driver.
3
Indicator Code
Drive being prepared for removal
Drive rebuilding
Drive failed
Predicted failure for the drive
Drive online
Inf o r mat io n Updat e
1-3