Dell Dimension 2200 Manual - Halaman 41

Jelajahi secara online atau unduh pdf Manual untuk Server Dell Dimension 2200. Dell Dimension 2200 50 halaman. Vga card installation instructions
Juga untuk Dell Dimension 2200: Manual Penggantian (9 halaman), Petunjuk Instalasi (1 halaman)

Halaman Cetak

Computer data – Two boxes below the title that display the system processor, L2 cache, service tag, and the version number of the system setup

program.

Options – A scrollable box listing options that define the configuration of your computer (including installed hardware, power conservation, and security

features).

Fields to the right of the listed options contain settings or values. The settings and values that you can change are brighter on the screen. All other

settings and values are set by the computer and cannot be changed. When <Enter> appears to the right of an option, press <Enter> to access a pop-up

menu of additional options.

Key functions – A line of boxes across the bottom of all system setup screens that lists keys and their functions within the system setup program.

Help – Press <F1> for information on the option that is selected (highlighted).

Option

System Time

System Date

Diskette Drive A:

Primary Drive 0:

Primary Drive 1:

Secondary Drive 0:

Secondary Drive 1:

Boot Sequence

Memory Information

CPU Information

Integrated Devices (Legacy Select Options) Displays integrated device options when <Enter> is pressed.

PCI IRQ Assignments

IRQ Reservations

System Security

Keyboard Numlock

Report Keyboard Errors

Auto Power On

Remote Wake Up

AC Power Recovery

Fast Boot

Suspend Mode

System Event Log

Asset Tag

The following table shows CPU Information option information.

Option

Function

CPU Speed

Sets the CPU speed. The default is Normal.

Bus Speed

Displays the bus speed.

Processor ID

Displays processor ID.

Clock Speed Displays clock speed.

Cache Size

Displays cache size.

The following table shows Integrated Devices (Legacy Select Options) information.

Option

Function

Sound

Turns the integrated sound off and on. The default is On.

Mouse Port

Turns the mouse port off and on. The default is On.

USB Emulation

Turns USB emulation off and on. The default is On.

USB Controller

Turns the USB controller off and on. The default is On.

Serial Port 1

Sets serial port options and turns the port off and on. The default is Auto.

Parallel Port

Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.

IDE Drive Interface

Sets the IDE drive interface options. The default is Auto.

Diskette Interface

Sets floppy drive interface options. The default is Auto.

PC Speaker

Turns the PC speaker off and on. The default is On.

Primary Video Controller Sets the primary video controller. The default is AGP.

Function

Displays the system time.

Displays the system date.

Displays floppy drive details.

Displays primary hard drive 0. The default is Auto.

Displays primary hard drive 1 (if installed). The default is Off.

Displays secondary hard drive 0. The default is Auto.

Displays secondary hard drive device type. The default is Off.

Displays boot sequence when <Enter> is pressed.

Displays amount of system memory.

Displays CPU information when <Enter> is pressed.

Displays PCI IRQ assignments when <Enter> is pressed.

Displays the IRQ reservations when <Enter> is pressed.

Displays system security options when <Enter> is pressed.

Turns the Keyboard NumLock option on and off. The default is On.

Displays keyboard errors when set to Report. The default is Report.

Allows auto power-on. The default is Disabled.

Allows remote Wake on LAN. The default is Off.

Enables AC power recovery to occur. The default is Last.

Turns the fast boot option on and off. The default is Off.

Displays the suspend state used by the computer. The default is S3.

Displays the system event log when <Enter> is pressed.

Displays asset tag information.