Dell DL4300 Panduan Penyebaran - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Server Dell DL4300. Dell DL4300 33 halaman.
Juga untuk Dell DL4300: Memulai (2 halaman), Memulai dengan Sistem Anda (2 halaman), Memulai dengan Sistem Anda (2 halaman)

Halaman Cetak
Dell DL4300 Panduan Penyebaran

Configuring host name and domain settings

You must assign a host name for the appliance. It is recommended that you change the host name
before starting backups. By default, the host name is the system name that the operating system assigns.
NOTE: If you plan to change the host name, it is recommended that you change the host name at
this stage. Changing the host name after completing the AppAssure Appliance Configuration
wizard requires manually performing several steps.
To configure the host name and domain settings:
1.
On the Configure host name and domain setting page, to change the host name for the appliance,
in New host name enter an appropriate host name.
2.
If you do not want the appliance to join a domain, select No in Do you want this appliance to join a
domain?
By default, Yes is selected.
3.
To join the appliance to a domain, enter the following details:
•
Domain name
•
Domain user name
NOTE: The domain user must have local administrative rights.
•
Domain user password
4.
Click Next.
NOTE: Changing the host name or the domain requires restarting the machine. After restarting
the machine, the AppAssure Appliance Configuration wizard launches automatically. If the
appliance is joined to a domain, after restarting the machine, you must log in as a domain user
with administrative privileges on the appliance.
The Configure SNMP Settings page is displayed.

Configuring SNMP settings

Simple Network Management Protocol (SNMP) is a commonly used network management protocol that
allows SNMP-compatible management functions such as device discovery, monitoring, and event
generation. SNMP provides network management of the TCP/IP protocol.
To configure SNMP alerts for the appliance:
1.
On the Configure SNMP Settings page, select Configure SNMP on this appliance on the Configure
SNMP Settings page.
NOTE: Deselect Configure SNMP on this appliance if you do not want to set up SNMP details
and alerts on the appliance and skip to step 6.
2.
In Communities, enter one or more SNMP community names.
Use commas to separate multiple community names.
3.
In Accept SNMP packets from these hosts, enter the names of hosts with which the appliance can
communicate.
Separate the host names with commas, or leave blank to allow communication with all hosts.
4.
To configure SNMP alerts, enter the Community Name and the Trap destinations for the SNMP
alerts and click Add.
13