Dell Force10 C150 Panduan Memulai Cepat - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Dell Force10 C150. Dell Force10 C150 33 halaman. Quick start guide

Halaman Cetak
Dell Force10 C150 Panduan Memulai Cepat

Cable and Adapter Pin Assignments

Use the console port on the RPM of the C150 or C300 to connect to a terminal
port, PC serial port, or a terminal server to configure and monitor your system.
An RJ-45 Ethernet cable is required to connect to the Ethernet port.
The console port is an RJ-45 and the pinouts are listed in Table 2-1.
Table 2-1. Pin Assignments for Console Port (RJ-45)
Pin
1
NC (unused
2
3
4
5
6
7
8
NC (unused

Accessing the Console with a DB-9 Adapter

You can connect to the console using an RJ-45 to RJ-45 rollover cable and an
RJ-45 to DB-9 female DTE adapter (labeled "TERMINAL") to a terminal
server (for example, PC).
Table 2-2. Pin Assignments Between the Console and a DTE Terminal Server
Console Port
RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-9
Signal
RJ-45 Pinout
RTS
DTR
TxD
GND
22
Installing the Software
Signal
Input/Output
-
DTR
Output
TxD
Output
GND
-
GND
-
RxD
Input
DSR
Input
-
RJ-45 Pinout
1
8
2
7
3
6
4
5
Terminal
Adapter
Server Device
DB-9 Pin
Signal
8
CTS
6
DSR
2
RxD
5
GND