Dell PowerEdge 2900 Manual - Halaman 12
Jelajahi secara online atau unduh pdf Manual untuk Server Dell PowerEdge 2900. Dell PowerEdge 2900 26 halaman. Tower-to-rack conversion guide
Juga untuk Dell PowerEdge 2900: Informasi Instalasi (11 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (10 halaman), Memperbarui (2 halaman)
Halaman Cetak
Figure 1-2. Removing the Tower Bezel
1
3
1
bezel
Preparing the System for Conversion
1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet
and peripherals.
2 Note the order of the hard drives in your system and remove all hard drive carriers and drive blanks
from the drive bays.
3 If present, remove the filler panels from the peripheral bay.
NOTE:
It is not necessary to remove any devices installed in the peripheral bay.
4 If present, unlock and remove the Kensington cable lock on the back of the system chassis.
CAUTION:
The system may weigh up to 45 kilograms (100 pounds) when fully loaded. To prevent personal injury,
do not attempt to move the system by yourself.
5 Place the system on its side on a flat, level work surface and orient the system so that the feet hang over
the edge of the table.
10
Tower-to-Rack Conversion Guide
2
keylock
3
release latch
2