- ページ 12

サーバー Dell PowerEdge 2900のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2900 26 ページ。 Tower-to-rack conversion guide
Dell PowerEdge 2900 にも：インストレーション情報 (11 ページ), インストレーション・マニュアル (14 ページ), インストレーション・マニュアル (10 ページ), 更新 (2 ページ)

Figure 1-2. Removing the Tower Bezel

bezel

Preparing the System for Conversion

1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet

and peripherals.

2 Note the order of the hard drives in your system and remove all hard drive carriers and drive blanks

from the drive bays.

3 If present, remove the filler panels from the peripheral bay.

NOTE:

It is not necessary to remove any devices installed in the peripheral bay.

4 If present, unlock and remove the Kensington cable lock on the back of the system chassis.

CAUTION:

The system may weigh up to 45 kilograms (100 pounds) when fully loaded. To prevent personal injury,

do not attempt to move the system by yourself.

5 Place the system on its side on a flat, level work surface and orient the system so that the feet hang over

the edge of the table.

Tower-to-Rack Conversion Guide

keylock

release latch